Err

ENQUIRIES 01289 466101 (7 days)
Need help measuring? Text any photos to 07801703093
quality drawers made for any space
HOW TO ASSEMBLE INTERNAL METABOX DEEP
This page shows the quickest and easiest way to assemble your drawer box.

If you would prefer to watch a video of this procedure, click here.



Tools and materials required.
  • Cordless drill driver or equivalent
  • Philips screwdriver
  • Set square or straight edge
  • Tape measure
  • Pencil
  • Supports, or a box that is taller than the drawer sides
  • Complete internal drawer kit

  • First attach sides onto front by slotting each side into the plastic bracket n the drawer front
  • Tighten the screw on each bracket
  • Place the base of the drawer box on top of the cardboard box or packer
  • Present the completed front and sides to the base as shown
  • Pull the base tight against the front ensuring there is no gap
  • Attach the base using the 15mm screws supplied
  • Turn the box over and slide the back panel into position
  • Attach the back panel with the 8 x 15mm screws supplied
  • You are now ready to mark out and attach the drawer runners