Hi, I have fitted Shallow Blum Tandem box drawer OK. But how do I get the drawer out of the carcass if I need to?

Pull the drawer all the way out. Now hold either side at the front and pull upward and "wiggle" at the same time. Don't worry you won't damage it. The drawer will shake loose from the runners and lift upward and out.

 
I am looking to install drawers into my eaves. What drawer depths can you offer ?

Blum Metabox and Tandembox are available in the following runner lengths
Metabox SHALLOW OR DEEP SIDES  270mm, 350mm, 400mm, 450mm, 500mm
Tandembox SHALLOW OR DEEP SIDES 270mm, 350mm, 400mm, 450mm, 500mm, 550mm, 650mm

 
My kitchen cupboards are a non standard 16mm wide should I say15mm or 18mm for the internal drawers

You can say either, as there is the opportunity to add a note to your order to specify the 16mm size.
We always look out for and follow these special instructions.

 
Do you have a system for use in wardrobes? I think the ones on your website would suit to put 2 or 3 sliding drawers inside the wardrobe at the bottom. What do you think? Thank you, Chris

Hi Chris, Thanks for your enquiry.
Yes, any of our drawers can be used in wardrobes. 
As long as the unit is parallel and square, the drawer will work.
The information we would need is the runner length required, and the aperture or opening the drawer is going in.

 
What measurements do I need to order the correct size drawer box?

Just three measurements are required. See our measuring page for further details.
1. Thickness of base unit sides (15mm or 18mm)
2. Outside width of base unit (300mm 400mm 500mm etc)
3. Measurement back to front on the inside of the unit.

 
Can you supply drawer boxes in other sizes?

Yes we can. We can supply different runner lengths and any width drawer box between 200mm and 1000mm.  Just check out our measuring page, and contact us with your sizes.

 
What is your return policy?

Full details of our return policy can be seen here.

 
How much is UK delivery and how long does it take?

Standard UK delivery is £6.75 per order irrespective of the size of the order. We aim to dispatch within 5 working days. Please see our full delivery information here.

 
What is a BLUM SpaceTower?

A BLUM Space Tower is what is achieved by installing 4 x deep and 1 x shallow Blum Internal drawers in a larder cupboard. At Drawerboxes.co.uk, a Space Tower can be made with any mix or quantity of deep or shallow Blum drawers depending on your own requirements. 

 
What is a Plinth Pod

Plinth Pods (tm) are exclusive to Drawerboxes.co.uk.
The Plinth Pod trade mark is owned by Drawerboxes Ltd.
A Plinth Pod is a self contained, made to measure mini cabinet, which contains a drawer, which fills the cabinet as much as possible. The Pod is then slid under a kitchen or bedroom cabinet between the feet (or side supports), and attached to the floor with the fixings supplied. Finally a section of existing plinth is attached as the "drawer front".

 
Does a plinth pod drawer front touch the floor? Will it mark the flooring?

No, if installed correctly, the plinth pod drawer front will stay at the set height, just like any other drawer in your kitchen.

 
What is the biggest width of drawer box you can supply?

For a base unit 1200mm (1.2 metre) wide. Higher weight capacity soft close drawer runners are required.

 
Do your drawer boxes come fully assembled?

Normally they are packed flat in order to avoid damage in transit, and also to keep delivery costs down, but the drawers are easy to assemble in minutes. Please see our How-to videos section. We can supply all drawers fully assembled by request subject to additional carriage where applicable.

 
Is there a guarantee or warranty with your drawer boxes?

All our Blum drawer boxes come with their fantastic LIFETIME WARRANTY. Every order comes with a warranty card which guarantees the drawer components for the lifetime of the furniture. The warranty card has a UK freephone number to contact Blum direct.

 
What is soft close?

Our Blum Tandembox kits come with soft close as standard. Soft close is a damper mechanism fitted in the runner that gently slows the movement of the drawer over the last few centimetres of travel.

 
What is the advantage of internal drawers?

With internal drawers, you keep the existing door on your unit, and fit drawers inside. Drawers allow much easier access to the contents of the base unit meaning you never have to get down on hands and knees to rummage around in the bottom shelf.

 
Can I use my existing drawer front?

Yes you can. Our Metabox and Tandembox drawer kits will accept your existing drawer front using the fixing plates and screws supplied in the kit.

 
Can you supply drawer fronts?

Yes, our associate company has been supplying made to measure kitchen doors and drawer fronts for 25 years. It may be difficult to get an exact match if you are trying to replace a damaged front, or add to an existing kitchen. For further information on drawer fronts or doors, please contact us.

 
Can you supply kitchen doors?

Yes, our associate company has been supplying made to measure kitchen doors and drawer fronts for 25 years. It may be difficult to get an exact match if you are trying to replace a damaged front, or add to an existing kitchen. For further information on drawer fronts or doors, please contact us.

 
Can you supply base units?

Yes, we can supply base units in any size, and over 25 different finishes. Please contact us with your requirements.

 
Can I specify a delivery day?

Yes as long as you observe the 5 working day dispatch timescale. just call or email your requirements and we will do our very best to oblige.

 
When will my order be delivered?

We aim to dispatch all orders within 5 working days. Please see our delivery page for further information.

 
My door has standard hinges, can i still fit an internal drawer?

Yes, we supply a pre drilled 25mm thick packer to pack out the runner on the hinge side of your unit.