Length of drawer sides and runners required : 500mm
Good product with instructions easy to read and follow.
Ron B. 9/28/2023 at 16h24
Length of drawer sides and runners required : 400mm
Seem well made, looking forward to assembling.
Terry T. 10/31/2022 at 19h54
Length of drawer sides and runners required : 400mm
Order shipped in line with expectation. Product was of good quality and went together easily. Instructions for fitting were a little confusing so I think improvements could be made here! Otherwise all good and would recommend. Thank you Drawerrboxes :-).
Andrew B. 7/21/2022 at 11h04
Length of drawer sides and runners required : 450mm
Reasonable product.
Jonathan C. 4/28/2022 at 08h03
Length of drawer sides and runners required : 400mm
Building the drawer box was easy but fitting the draw front not so.
The margin of error when positioning the fixing plate is nil.
The photos in the instructions are fuzzy and too small which does not help.
Arthur s. 4/9/2022 at 08h27
Length of drawer sides and runners required : 450mm
Not sure if it was my measuring or your order got muddled but it was sorted, thank you.
Sue S. 9/29/2021 at 17h33
Length of drawer sides and runners required : 450mm
Drawer is fine but instructions for fitting the attachments to the draw front not at all clear with a distance "d" said to be deducted without defining what "d" refers to.
Colin G. 6/1/2021 at 17h20
The distance isn't specified as it can be different for each kitchen. Please look again, and watch videos if required.
Drawerboxes.co.uk 6/1/2021 at 22h24
Length of drawer sides and runners required : 450mm
Great quality, easy to follow instructions.
Samantha B. 2/11/2021 at 17h12
Length of drawer sides and runners required : 450mm
Quality of product i would say is medium as the runners are not quiet
The instructions for fitting drawer front seemed over complicated . In the end i just ignored them and located by holding up the drawer front and marking with a red felt tip pen then just screwed drawer into place. The must have tool is and electric screwdriver !
Harvey M. 1/30/2021 at 15h06
Thanks for the review. If you want "silent" runners, our Blum Tandembox are very smooth and almost silent.
We would advise using the instructions, as the end result will have a much better chance of looking 100%.
Drawerboxes.co.uk 1/31/2021 at 15h45
Length of drawer sides and runners required : 450mm
Replaced a broken kitchen drawer. The instruction booklet helped.
PHILIP D. 7/13/2020 at 13h20
Length of drawer sides and runners required : 450mm
Chipboard bottoms could be better.
John C. 6/12/2020 at 12h45
Thanks for the feedback. This is the first time we have had this comment re the drawer bottoms. We source good quality mfc board made by the top manufacturers like Egger and Kronospan. There is no way we know of improving on this.
Drawerboxes.co.uk 6/12/2020 at 23h21
Length of drawer sides and runners required : 450mm
Having purchased one before I found it ideal for our needs. It is sturdy and well thought out in the way it is put together, which I found easy to do. I like the 'runners' at the top so the weight once filled improves it's secure sliding motion. The design for attaching the front drawer cover is great and offers a some margin of error, should it be needed. I purchased x7, and I've fitted them all now in the kitchen, looking lovely with the front covers, a transformation! Would highly recommend.
Paul H. 6/8/2020 at 18h33
Length of drawer sides and runners required : 450mm
Does what it says on the tin .!!
Jason K. 5/22/2020 at 09h00
Length of drawer sides and runners required : 450mm
I was so impressed that I've ordered another nine drawers! Two of which are the deeper ones. I think they fit our requirements just fine.
I rarely give top marks for anything as I'm not sure perfection exists! Until they've been fitted and used I cannot go higher, lets say - so far so good, and I've invested in more, so that's as good as it gets isn't it?
Paul H. 5/21/2020 at 17h06
Length of drawer sides and runners required : 400mm
I was concerned with the drawer runners as one, the right side had a lip that the left one didn't. there was nothing in the instructions to say that there was a difference and the photos in the instructions are not clear, they are blurred.
As a result I had to telephone for advice and was informed that the items were correct and that my feedback would be noted.
My 4 star rating on Merchandise is as a result of my review above. Other than that the drawers are well designed but too expensi.
Neil C. 5/11/2020 at 13h31
Thanks for the feedback. The lip on the runner is part of the design. One side is "captured" by the lip, the other is free. This allows some tolerance in the width, and is a very clever design by Blum.
Drawerboxes.co.uk 5/5/2020 at 13h04
Length of drawer sides and runners required : 500mm
See above.
Malcolm J. 3/21/2020 at 17h00
1. Thickness of your base unit sides (in mm) : 18mm2. Outside width of base unit (Not the old drawer) : 600mm wide
Very good replacement drawer.
Gary B. 1/21/2020 at 20h06
1. Thickness of your base unit sides (in mm) : 15mm2. Outside width of base unit (Not the old drawer) : 600mm wide
A good drawer but let down by damage to the drawer base, but sillier response to complaint was exemplary.
David W. 1/6/2020 at 10h16
1. Thickness of your base unit sides (in mm) : 15mm2. Outside width of base unit (Not the old drawer) : 500mm wide
Good product.
JD. 10/27/2019 at 14h40
1. Thickness of your base unit sides (in mm) : 15mm2. Outside width of base unit (Not the old drawer) : 400mm wide
Easy to assemble, came with everything needed to fit into my units.Just annoying that the cutlery tray doesn't fit the drawer.
John J. 9/15/2019 at 17h55
Please give us a call re the cutlery tray. If the drawer is a standard size, it should fit. We will be happy to collect and refund if required.
freephone 0800 0285588.
Drawerboxes.co.uk 9/15/2019 at 18h03
1. Thickness of your base unit sides (in mm) : 15mm2. Outside width of base unit (Not the old drawer) : 300mm wide
Product as expected. Delivery good and ahead of schedule. Assembly instructions (and on line videos) could be better.
Ajbhsb. 9/4/2019 at 12h29
1. Thickness of your base unit sides (in mm) : 15mm2. Outside width of base unit (Not the old drawer) : 600mm wide
Product as expected. Delivery good and ahead of schedule. Assembly instructions (and on line videos) could be better.
Ajbhsb. 9/4/2019 at 12h29
1. Thickness of your base unit sides (in mm) : 15mm2. Outside width of base unit (Not the old drawer) : 500mm wide
Sturdy build and easy to assemble. Can’t believe I didn’t swap my old tired drawers years ago.
Peter M. 8/4/2019 at 09h05
1. Thickness of your base unit sides (in mm) : 15mm2. Outside width of base unit (Not the old drawer) : 500mm wide
The drawer was not quite wide enough for the carcas, despite the exact measurements I sent. However, I rectified this using some plywood cut and shaped for the runners to attach to. Once the drawer was fitted, it was sturdy and smooth when opening and closing. Apart from the above issue, no other problems, thanks.
Panda. 6/8/2019 at 18h55
Thanks for the feedback.
Please note, if the correct measurement is given, all drawers will fit 100% every time.
Drawerboxes.co.uk 6/2/2019 at 12h46
1. Thickness of your base unit sides (in mm) : 18mm2. Outside width of base unit (Not the old drawer) : 600mm wide
The drawer boxes are very Good.
John M. 11/9/2018 at 13h45
